Recoil DART iron shafts are designed to provide increased consistency, optimal feel, and precise ball flight for all golfers.

Recoil DART 90 and 105 iron shafts will come as a constant weighted tapered set.

Recoil DART has been designed after years of research, testing and development to precisely optimize shaft hoop stiffness in the critical areas of the golf shaft. To achieve maximum distance, optimum hoop stiffness is designed into the energy transfer section of the shaft. In the tip section, the hoop stiffness is increased to maintain feel while also stabilizing the tip section for maximum consistency and optimum ball flight. 

DART- Dual Action Recoil Technology eliminates inconsistent areas in the golf shaft

 

Recoil Technology provides greater consistency, distance and trajectory control

  • Recoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

 

Ion Plating (IP) creates a stunning and premium finish vs. traditional paint

  • The raw shaft is put into a vacuum chamber where metal ions are emitted and bond to the shaft.
  • The process takes extra time and is more expensive than traditional methods.
  • This extra step is all done in-house, so we are able to ensure tighter control for the best quality.

Recoil- It's more than a reaction. It's a revolution.

 

Description Flex Weight Torque (deg) Launch Butt OD Tip OD Length
Recoil DART 90 F3 2 iron R 90g 3.0 Mid 0.600" 0.355" 41.0"
Recoil DART 90 F3 3 iron R 90g 3.0 Mid 0.600" 0.355" 40.5"
Recoil DART 90 F3 4 iron R 90g 2.9 Mid 0.600" 0.355" 40.0"
Recoil DART 90 F3 5 iron R 90g 2.7 Mid 0.600" 0.355" 39.5"
Recoil DART 90 F3 6 iron R 90g 2.7 Mid 0.600" 0.355" 39.0"
Recoil DART 90 F3 7 iron R 90g 2.6 Mid 0.600" 0.355" 38.5"
Recoil DART 90 F3 8 iron R 90g 2.6

Mid

0.600" 0.355" 38.0"
Recoil DART 90 F3 9 iron R 90g 2.6 Mid 0.600" 0.355" 37.5"
Recoil DART 90 F3 Wedge R 90g 2.5 Mid 0.600" 0.355" 37.0"
               
Recoil DART 90 F4 2 iron S 90g 2.9 Mid 0.600" 0.355" 41.0"
Recoil DART 90 F4 3 iron S 90g 2.9 Mid 0.600" 0.355" 40.5"
Recoil DART 90 F4 4 iron S 90g 2.9 Mid 0.600" 0.355" 40.0"
Recoil DART 90 F4 5 iron S 90g 2.7 Mid 0.600" 0.355" 39.5"
Recoil DART 90 F4 6 iron S 90g 2.6 Mid 0.600" 0.355" 39.0"
Recoil DART 90 F4 7 iron S 90g 2.5 Mid 0.600" 0.355" 38.5"
Recoil DART 90 F4 8 iron S 90g 2.4 Mid 0.600" 0.355" 38.0"
Recoil DART 90 F4 9 iron S 90g 2.4 Mid 0.600" 0.355" 37.5"
Recoil DART 90 F4 Wedge S 90g 2.3 Mid 0.600" 0.355" 37.0"
               
Recoil DART 105 F4 2 iron S 106g 2.1 Mid 0.600" 0.355" 41.0"
Recoil DART 105 F4 3 iron S 106g 2.0 Mid 0.600" 0.355" 40.5"
Recoil DART 105 F4 4 iron S 106g 2.0 Mid 0.600" 0.355" 40.0"
Recoil DART 105 F4 5 iron S 106g 2.0 Mid 0.600" 0.355" 39.5"
Recoil DART 105 F4 6 iron S 106g 2.0 Mid 0.600" 0.355" 39.0"
Recoil DART 105 F4 7 iron S 106g 2.0 Mid 0.600" 0.355" 38.5"
Recoil DART 105 F4 8 iron S 106g 2.0 Mid 0.600" 0.355" 38.0"
Recoil DART 105 F4 9 iron S 106g 2.0 Mid 0.600" 0.355" 37.5"
Recoil DART 105 F4 Wedge S 106g 2.0 Mid 0.600" 0.355" 37.0"
               
Recoil DART 105 F5 2 iron X 106g 2.0 Mid 0.600" 0.355" 41.0"
Recoil DART 105 F5 3 iron X 106g 2.0 Mid 0.600" 0.355" 40.5"
Recoil DART 105 F5 4 iron X 106g 2.0 Mid 0.600" 0.355" 40.0"
Recoil DART 105 F5 5 iron X 106g 2.0 Mid 0.600" 0.355" 39.5"
Recoil DART 105 F5 6 iron X 106g 2.0 Mid 0.600" 0.355" 39.0"
Recoil DART 105 F5 7 iron X 106g 2.0 Mid 0.600" 0.355" 38.5"
Recoil DART 105 F5 8 iron X 106g 2.0 Mid 0.600" 0.355" 38.0"
Recoil DART 105 F5 9 iron X 106g 2.0 Mid 0.600" 0.355" 37.5"
Recoil DART 105 F5 Wedge X 106g 2.0 Mid 0.600" 0.355" 37.0"

 

Flex Driver Swing Speed (mph) Driver Carry (yards)
F3 80 - 95 200 - 240
F4 90 - 105 225 - 265
F5 105+ 265+

 

 

Tipping Instructions 2 iron 3 iron 4 iron 5 iron  6 iron  7 iron  8 iron 9 iron Wedge
Recoil DART 90 / 105  F3, F4  Iron  no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only no tip trimming, taper tip, butt trim only